Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual

Configuring the Virtual Service Engine Interface
Command or Action
Step 7 Router(config-if)# service-engine
hostname module-side-hostname
module-side-domain-name
Step 8
Router(config-if)# service-engine
wma-url url-string
Step 9 Router(config-if)# service-engine
wma-token token-string
Step 10 Router(config-if)# service-engine
wma-passcode name-string key-string
Step 11 Router(config-if)# no shutdown
What to Do Next
The following is an example of the use of these configurations:
ip nat inside source static 10.200.72.18 192.0.2.1
interface Service-Engine1/0/0
ip address 10.200.72.17 255.255.255.252
ip nat inside

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS

XE Everest 16.5
360
Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
Purpose
• name-server1-ip-address—Specifies the IP address of the primary domain
name server.
• name-server2-ip-address—Specifies the IP address of the secondary
domain nameserver.
Specifies the host name and domain name given to the Cisco WebEx Node
SPA, where:
• module-side-hostname—Specifies the host name of the service engine
interface. The default host name is "service-spa."
• module-side-domain-name—Specifies the domain name of the service
engine interface.
The domain name must be assigned as a preliminary step. See the
Note
Registering with the WebEx Data Center and the Cisco WebEx Node
Management System, on page
Specifies the URL provided by registration and provisioning of the SPA in the
Cisco WebEx Node Management System.
For more information, see the
Cisco WebEx Node Management System, on page
Specifies the encrypted token string provided by the Cisco WebEx Node
Management System.
The token-string must match the code provisioned in the Cisco WebEx
Note
Node Management System for the named SPA. For more information,
see the Registering with the WebEx Data Center and the Cisco WebEx
Node Management System, on page
Specifies the WebEx Node SPA name and key used for authentication, where:
• name-string—Specifies the name assigned to the SPA.
• key-string—Specifies the password used for encrypted authentication.
Note The key-string must match the passcode provisioned in the Cisco
WebEx Node Management System for the named SPA. For more
information, see the
Cisco WebEx Node Management System, on page
Activates the interface.
353.
Registering with the WebEx Data Center and the
353.
353.
Registering with the WebEx Data Center and the
353.
OL-14127-17