Execution By Trigger - Delta AH500 Manual

AH500 Module Manual
After downloading is over, below appears the dialog box showing the downloading information about
AH10SCM-5A by clicking "OK".

11.6.3 Execution by Trigger

11.6.3.1 Control Condition
The program edited through ISPSoft can manage Modbus data exchange (such as to read bit and
word device, write bit and word device) and UD Link data transferring and receiving trigger which is
classified into Group ID trigger and sequence trigger.
Input Output
Modbus data exchange
D1506 D1006
reading trigger
Modbus data exchange
D1507 D1007
writing trigger
D1511 D1011 UD Link Group ID trigger
D1513 D1013 UD Link sequence trigger
11-100
COM port
communication
parameter
High byte is triggered for reading bit device;
low byte is for reading word device.
0: Not triggered
1: Triggered once
2: Always triggered
High byte is triggered for writing bit device;
low byte is for writing word device.
0: Not triggered
1: Triggered once
2: Always triggered
Group ID of UD Link trigger
0: Not triggered
1~254: The times for triggering
255: Always triggered
Description