Establishing The Connection Between Devicenet Builder And A Plc - Delta AH500 Manual

11.4.2.1 Establishing the Connection between DeviceNet Builder and a
PLC
To make the normal communication between DeviceNet Builder and PLC CPU, the communication
management software COMMGR should be set up first.
Set up COMMGR as below:
1. Open COMMGR.
2. Click "Add" button to add a communication channel Driver 1 and set up the channel as follows.
Ch a pt er 11 DeviceNet Re m ote I/O Module AHRTU-DNET
11-19