Function Switch - Delta AH500 Manual

AH 5 00 Mo d u le Ma n ua l

15.2.5 Function Switch

The function switch on AH10COPM-5A is used to set the communication speed at which
AH10COPM-5A is connected to a CANopen network. There is a limit on the maximum
communication distance to which a communication speed corresponds.
DR2 DR1 DR0
OFF OFF OFF
OFF OFF ON
OFF ON OFF
OFF ON ON
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
IN0

After users change the communication speed at which AH10COPM-5A is connected to a
CANopen network, they have to power AH10COPM-5A again, otherwise the change will not
take effect.

To prevent the DIP switch on AH10COPM-5A from being scratched, please carefully use a
slotted screwdriver to rotate the DIP switch on AH10COPM-5A.

15.3 Installation
15.3.1 Installing a Module
1. Insert the projection under a module into a hole in a backplane.
2. Push the module in the direction indicated by the arrow until it clicks.
1 5 - 6
Maximum
Communication
communication
speed
10 kbps
20 kbps
50 kbps
125 kbps
250 kbps
500 kbps
800 kbps
1 Mbps
distance
5000 m
2500 m
1000 m
500 m
250 m
100 m
50 m
25 m
Reserved
DR 2
DR 1
DR 0
I N 0