Delta AH500 Manual page 625


Add AH10PFBS-5A slave and configure the parameters
1. Select the PROFIBUS-DP bus as below; double click AH10PFBS-5A icon in the right
column of the following window and a new dialog box appears.
2. Select the node address of AH10PFBS-5A slave from the pull-down menu of "Address" in
the following new dialog box. The node address here must be consistent with that set by
the address switch of AH10PFBS-5A. Click "OK" after the node address setting is over.
Ch a pt er 1 3 P RO F IB U S Slave M o du l e A H1 0 PF B S
13-31