Delta AH500 Manual page 660

AH500 Module Manual
 Setting of AH04DA-5A
After configuring AH04DA-5A, refer to Figure 4 for the related parameters setting.
Explanation of the options above
Name
rack
slot
CH0~CH3 output
mode
CH0~CH3 output
hold
14-30
Figure 4
Setting Explanation
The number of the rack where the I/O module is
(Rack number ranges from 1 to 8, 1 represents
0x01
the main rack, 2~8 stand for extension racks and
the slot number is 0~11.)
The number of the slot on the rack where the I/O
module is. (Rack number ranges from 1 to 8, 1
0x03
represents the main rack, 2~8 stand for
extension racks and the slot number is 0~11).
The output channel mode of AH04DA-5A is
disabled by default.
disable
Mode: disable
-10V~+10V
Mode: -10V~+10V
0V~10V
Mode: 0V~10V
5V~+5V
Mode: -5V~+5V
0V~+5V
Mode: 0V~+5V
1V~+5V
Mode: 1V~+5V
0mA~20mA
Mode: 0mA~20mA
4mA~20mA
Mode: 4mA~20mA
Output hold options
Enable: When the master PLC stops running, the
disable/enable
Disable: The output value of the output channel
output value of the output channel of the
module remains the same as that before
the master PLC stops running.
of the module is 0 when the master
PLC stops running.