AH 5 00 Mo d u le Ma n ua l
If AH10DNET-5A has been set to the slave mode, the software interface will be as shown below.
Note: If AH10DNET-5A has been set to the slave mode, set current AH10DNET-5A to the
master mode first and then conduct the next operation.
11. Select "Network" >> "Scan DeviceNet Network" and AH10DNET-5A starts to scan the whole
network. All the node icons and device names on the network will be displayed on the software
as below.
1 0 - 5 4