Delta AH500 Manual page 457

E.g. double click where "AH04AD-5A" icon is and AH04AD-5A configuration interface will pop up
immediately as below, which is used for parameter mapping configuration of AH04AD-5A.
Explanation of the I/O module configuration interface:
Item
To show the module name, MDS version and MDS build date. The module
MDS parameters will be displayed on the left-side window according to MDS file.
information Regarding details on the module parameters refer to the user manual of relevant
module.
Parameter All module parameters read from MDS file are listed and these parameters are
list of module set to control the module to run normally.
When AHRTU-DNET-5A detects an error occurs in the module, how
Exception
AHRTU-DNET-5A will treat it. Options "RTU keep running" and "RTU stop
handling
running" are for selection.
Note: When the exception handling setting of the I/O module is inconsistent with error setting of
AHRTU-DNET-5A module, "RTU stop running" will be selected in priority.
Ch a pt er 11 DeviceNet Re m ote I/O Module AHRTU-DNET
Explanation
11-31