Delta AH500 Manual page 579

Click "Process Data" on the left-side window and the details about the slave configuration pop
out on the right-side window. The corresponding relations among the slave configuration
modules, the Input list and the Output list of master and the mapping parameters of the slave
are listed in the following table.
Module in the Input list
of master
4word input
2 word input
Module in the Output
list of master
4 word output
2 word output
Ch a pt er 1 2 N e t wor k Mo d u le AH 10 P F BM
Configured module of slave
4 Word Out, 4 Word In
2 Word Out, 2 Word In
Configured module of slave
4 Word Out, 4 Word In
2 Word Out, 2 Word In
Mapping parameter
of slave
Input_1 D200
Input_2 D201
Input_3 D202
Input_4 D203
Input_5 D500
Input_6 D501
Mapping parameter
of slave
Output_1 D300
Output_2 D301
Output_3 D302
Output_4 D303
Output _5 D600
Output_6 D601
1 2 - 4 3