Delta AH500 Manual page 390

AH 5 00 Mo d u le Ma n ua l
4. Double click AH10DNET Scanner icon on the above software interface and then the following
dialog box appears where "Output Start" and "Input Start" are for setting the starting addresses
of the mapping areas.
5. Select "Network" >> "Download" to download the starting addresses of the mapping areas and
the configuration data to AH10DNET-5A after the network configuration is completed.
6. Power off the AH500 series CPU module and then power it on again after downloading is
finished. And at the time, the starting addresses of the mapping areas are modified successfully.
1 0 - 2 8