Delta AH500 Manual page 682

AH500 Module Manual
14.9 Application Example 1
14.9.1 Control Requirement
To achieve the data exchange between AH CPU and the remote I/O modules connected to
AHRTU-PFBS-5A through the PROFIBUS DP network.
 Make Y0.0~Y0.3 of all 16AP11R modules connected on the main rack and extension rack ON.
 Control all AH08DA-5B modules and make channels 0 ~ 3 output the 5V voltage respectively.
 Monitor input voltages of the input channels 0 ~ 3 of all AH06XA-5A modules.
14.9.2 Connection Figure
Note: Slave module AHRTU-PFBS-5A setting
Set the node address of AHRTU-PFBS-5A to 2 with its rotary switches.
14-52