Ah10Scm-5A Module Configuration Interface - Delta AH500 Manual

11.4.2.6

AH10SCM-5A Module Configuration Interface

 AH10SCM-5A parameter setting
When AH10SCM-5A is used as the I/O module of AHRTU-DNET-5A, please ensure that the
master on the network is AH10DNET-5A and AH10SCM-5A has been inserted to the I/O slot of
the main rack. If the master is DVPNET on the network, AHRTU-DNET-5A will not support to
configure AH10SCM-5A.
On the main configuration interface of AHRTU-DNET-5A, double click AH10SCM-5A to set the
parameter mapping.
Ch a pt er 11 DeviceNet Re m ote I/O Module AHRTU-DNET
11-37