Configuration Of Devicenet Master - Delta AH500 Manual

10.9.3 Configuration of DeviceNet Master

1. Connect the devices following the figure below and remove the RS232 cable from
AHCPU530-EN to AHCPU510-EN.
DeviceNet Builder
Note: AH10DENT-5A on the right of AHCPU510-EN is used as the master and therefore the
RS232 cable must be connected to AHCPU510-EN.
2. Open ISPSoft; select "Tool" >> "Communication Setting" and then the following dialogue box will
pop up. Select the already built driver and then click "OK".
3. Select "File" >> "New" >> "New" and the following dialogue box will appear. Click "OK" after
selecting the corresponding PLC model.
Ch a pt er 1 0 De v ic eN e t Com m unic at i on Mo d ul e A H 10 DN ET
P 05 S
RS232
PS05
CPU510-EN
AH10DNET-5A
C U510-EN P
10DNET
1 0 - 4 9