Delta AH500 Manual page 441

Delta network products related with DeviceNet bus:
Product picture
Ch a pt er 11 DeviceNet Re m ote I/O Module AHRTU-DNET
Type
AH10DNET-5A, a DeviceNet module,
running on the I/O slot of AH500 series main
AH10DNET-5A
rack can work as the DeviceNet master or
slave.
AHRTU-DNET-5A, an AH500 series remote
I/O data exchange module, is used for
AHRTU-DNET-5A connecting AH500 series DI/DO module,
AI/AO module and AH10SCM-5A module to
the DeviceNet network.
DVPDNET-SL, a DeviceNet module,
DVPDNET-SL running on the left of S series PLC CPU can
work as the DeviceNet master or slave.
RTU-DNET, an S series remote I/O module,
is used for connecting S-series DI/DO
RTU-DNET
module, AI/AO module and other device to
the DeviceNet network.
It converts DeviceNet to Modbus gateway,
which can connect the equipment with the
IFD9502 RS-232 port or RS485 port complying with
the Modbus protocol to the DeviceNet
network.
The bus data analysis tool, with one end of
CAN interface and the other end of USB
interface can be used for getting the CAN
IFD6503
bus data or sending the data to the CAN bus
node. It is used with the Netview Builder
software together.
Function
11-15