Delta AH500 Manual page 372

AH 5 00 Mo d u le Ma n ua l
Delta network products related with DeviceNet bus:
Product picture
1 0 - 1 0
Type
AH10DNET-5A, a DeviceNet
module, running on the I/O slot of an
AH10DNET-5A AH500 series main backplane can
work as the DeviceNet master or
slave.
AHRTU-DNET-5A, a remote I/O
module, is used for connecting an
AHRTU-DNET-5A AH500 series DI/DO module, AI/AO
module and 10SCM module to the
DeviceNet network.
DVPDNET-SL, a DeviceNet module,
running on the left of an S series PLC
DVPDNET-SL
can work as the DeviceNet master or
slave.
RTU-DNET, a remote I/O module,
is used for connecting S-series
RTU-DNET DI/DO module, AI/AO module and
other device to the DeviceNet
network.
Used for connection between the
DeviceNet network and
electromechanical equipment such
IFD9502
as AC motor drive, PLC,
temperature controller, servo drive,
HMI, user-defined device.
The bus data analysis tool, with one
end of CAN interface and the other
end of USB interface can be used
IFD6503 for getting the CAN bus data or
sending the data to the CAN bus
node. It is used with the Netview
Builder software together.
Used for connecting the AC motor
E series AC motor
drive to the DeviceNet network via
drive
CME-DN01 card
Function