Delta AH500 Manual page 628

AH 5 00 Mo d u le Ma n ua l
Item
Input D mapping
(Slave->Master)
output D mapping
(Master->Slave)
7. Double click AH10PFBS-5A icon on the PROFIBUS network in "HW Config" dialog box and
then the following window pops up.
The indication of the above option is shown below.
Option
Los comm.
with master
8. Download the configuration data after configuration of the data is over.
After the connection between the master and AH10PFBS-5A is made and the NET light of
AH10PFBS-5A is green, it indicates that the communication between AH10PFBS-5A and
the PROFIBUS-DP master is normal. Otherwise, shoot the trouble according to the
instruction in chapter 8.
1 3 - 3 4
Indication
The number of starting D
register in input area
The number of starting D
register in output area
Selection
The input and output data before offline will keep
unchanged when AH10PFBS-5A and the master
Hold I/O data
are offline (E.g. the PROFIBUS-DP bus connector
is removed from the slave).
The output data received from the master will be
cleared to 0 and the input data will keep
Clear I/O data unchanged when AH10PFBS-5A and the master
are offline (E.g. the PROFIBUS-DP bus connector
is removed from the slave).
Default
0 ( Changeable by the keyboard)
100 (Changeable by the keyboard)
Indication