Screen Transition In Run Mode; Zn-Dpx21-S - Omron ZN-DPX21-S Series User Manual

5.3 Screen Transition in RUN Mode

Pressing the  or  key in RUN mode switches the display as follows. Pressing the MODE key
changes the operation mode.

5.3.1 ZN-DPX21-S

Measured
differential pressure
Number of writings
Current time
Measured
differential pressure
Differential pressure
threshold
Returns to the differential pressure display.
The differential pressure measurement value (Pa) is displayed in the
upper line.
If computation for the measured value has been set, the value after
computation is displayed with "MAX"/"MIN"/"AVE" and "RUN" turned ON.
If adjustment has been set, the value after adjustment is displayed with
"SCL" and "RUN" turned ON.
The number of writings to the internal memory since the recording start
is displayed in the upper line, the current time is displayed in the lower
line.
When measured data is written in the internal memory per time cycle
specified by measurement update cycle (CYCLE), the value in the upper
line increases by 1. When the internal memory becomes full, "FULL" is
displayed. If the data accumulated in the internal memory is written to
the SD memory card due to an event such as the SET/REC/STOP key
having been pressed during recording, the value will be cleared to 0.
The differential pressure measurement value (Pa) is displayed in the
lower line and differential pressure threshold value is displayed in the
lower line. The threshold value is displayed alternately between upper
limit (Hi) and lower limit (Lo).
If computation has been set, a differential pressure measurement value
after computation is displayed with "MAX"/"MIN"/"SCL" and "RUN"
turned ON.
If adjustment has been set, a differential pressure measurement value
after adjustment is displayed with "SCL" and "RUN" turned ON.
5-3
5. Measurement and Recording (Unit Operation)