Log Backup > Log Backup To Tftp; Ping; Reset; Reboot System - D-Link DXS-1210-10TS User Manual

D-Link DXS-1210 Series User Manual
Log Backup > Log Backup to TFTP
To save the log to a file using TFTP, enter the TFTP server IP address and destination URL then click
Backup.
Figure 4.19 – Tool Menu > Log Backup > Log Backup to TFTP
TFTP Server IP: Select IPv4 or IPv6 and enter the IP address.
Destination URL: Enter the destination URL for the backup.

Ping

To ping a computer or device, enter either Target IPv4 Address or Target IPv6 Address, Ping Times,
Timeout and Source IPv4 Address or Source IPv6 Address. Enter the required information, tick the
Infinite option to disable the Ping Times feature, and click Apply. The results will be displayed in the Result
box.
Figure 4.20 – Ping

Reset

Select which reset option you want to perform and click Apply.
Figure 4.21 – Tool Menu > Reset

Reboot System

Select to save your current settings and then click Reboot to restart the Switch.
Figure 4.22 – Tool Menu > Reboot System
Destination: Select the configuration destination to be saved.
Startup-config: When checking the box, only the current startup configuration file will be backed up which
may be stored in the "Config 1" or "Config 2" location.
17