Configuring The Alibi Memory; Updating Software; 4.5.10 Software Activation Codes; 4.5.11 Restoring Factory Settings - Sartorius cubis MPS Quick Reference Manual

Device parameters
Alibi memory configuration
Please select configuration:
Menu a Device parameters a Alibi memory configuration
Alibi memory on/off
Automatic deletion of older data
Initialize alibi memory
Back
Device parameters
Update software
Device parameters
Software activation codes
Device parameters
Restore factory settings
Choose functions to be reset to the
fact. sett.:
Menu a Device parameters a Factory settings
General weighing settings
User profiles with their local tasks
Task profiles
Menu
Interface configuration
Back All
4.5.8

Configuring the Alibi Memory

Here you can switch on the alibi memory, delete the recorded data, and set the
Menu
interval for automatic deletion.
t
Slide the right scroll bar in the submenu
the menu item
Turning the Alibi Memory On/Off
t
Select whether you want to have the alibi memory switched on or off.
Automatic Deletion of Older Data
t
Define whether the data stored in the alibi memory should be deleted
automatically at regular intervals after a pre-specified time.
t
If data should be regularly deleted, enter the desired interval (deletion cycle) in
days.
Reset and Initialize Alibi Memory
You can delete all data from the alibi memory immediately. The settings for the alibi
memory (on/off, deletion cycle) will remain stored.
t
To delete data in the alibi memory, confirm the security prompt.
4.5.9

Updating Software

t
Follow the instructions on the display.
Menu
y
After the software has been updated, the pipette calibration system will restart.
®
The Cubis software is regularly updated. A detailed description of how you can
perform a software update on your pipette calibration system can be found in the
user manual for the Cubis

4.5.10 Software Activation Codes

Here you will find the activation code administration.
Menu
t
Touch
WebService

4.5.11 Restoring Factory Settings

You can reset all settings individually to the factory settings at any time.
Menu
t
Slide the scroll bar in the sub-menu
the right to access the menu item
t
t
Highlight all settings which you want to reset and touch
t
Confirm the security prompt.
Next
Device parameters
.
Alibi config
® MCM model in Chapter "Updating your Software."
or in order to view the codes.
ClimaCon
Device parameters
Restore factory settings
Cubis
System Settings (Menu)
downward to
downwards and to
.
.
Next
®
MPS Quick Reference Guide 27