Assembly - Sartorius Cubis Series Operating Instructions Manual

3
2
1
2

Assembly

Installing the Analytical Draft Shield, Balance Assembly
Place parts on the balance as shown in the picture.
t
1. Shield plate
2. Pan support
3. Weighing pan
Slide the upper draft shield panel into the guide rails from the rear.
t
Slide the side draft shield panel into the guide rails from the rear.
t
Make sure the panels are within the upper and lower guide rails.
Slide the panels in until they engage.
t
1. Right draft shield panel
2. Left draft shield panel
1
y This completes the balance assembly.
Getting Started
Operating Instructions Cubis MSE 11