Installation And Removal Procedures Flipper Module Accessory - HID HDP5000 User Manual

High definition card printer/encoder

Hide thumbs Also See for HDP5000:

Table of Contents

Installation and Removal Procedures Flipper Module

Removing the Output Side Upgrade Cover

Tools needed: Press the Release tab with a flat blade. Use the Snap and Clip process.

Estimated Repair Time: 1 minute

Caution: Power off the Printer by unplugging the power cord from

the Printer.

Press the release tab in back while simultaneously pulling at the center of the

bottom edge.

Reverse instructions to re-assemble. Leave it off if your printer is upgraded for

the Flipper or Lamination Module.

HDP5000 High Definition Card Printer/Encoder User Guide

HID Global Corporation

L000950 Rev 1.8

Troubleshooting