All rights reserved
Using the Click and Drag capability
Click and drag the corners and the sides of an area to change size and location of area.
•
The Horizontal, Vertical size and X, Y coordinates update accordingly.
Click and drag the area to change the location.
•
The X, Y coordinates update accordingly.
Selecting "inches or mm" radio button
Select from the inches or mm radio button to change the measurement type. (Note: This is
similar to the choice on the Card tab.)
•
The inches radio button displays the area size and the location in inches.
•
The mm radio button displays the area size and the location in mm.
Using the Add and Delete buttons
Step
Procedure
1
Use the Add button for these capabilities:
•
Add an area default sized to .2 (.2 at location "0" with focus on the added
area).
•
Add multiple areas in the same location with the same affect (as if there
were only one area). (Note: Intersecting/overlapping areas do not
cancel each other out; instead, they act as one area.)
2
Using the Delete button to delete the area with focus from the graphic.
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8
140