Appendix A: Hdpii Plus; Accessory Procedures: Using The Security Lock Slot - HID FARGO HDP5000 User Manual

HDPii Plus
This section is specific to the HDPii Plus printer only.
Dimensions:
HDPii Plus: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD

HDPii Plus + Dual-Sided Module: 11.50"H x 25.00"W x 9.25"D / 292mmH x 626mmW x 235mmD

A.1

Accessory Procedures: Using the Security Lock Slot

Important: Compatible locks are not sold by HID Global; however, they are readily available from
computer stores.
The HDPii Printer has a Security Lock Slot located in the back lip of the metal chassis to accommodate
a standard laptop security lock.
To prevent unauthorized removal of the HDPii, attach an industry standard security cable to an
immovable object and then lock the cable to the Security Lock Slot.
Note: HID Global does not sell any type of locking device, but provides this feature for your added
security.
The lock slot has a plastic covering that needs to be penetrated by the lock.
Note: Simply push the lock end into the slot with adequate force to break the protective film.
Follow the locking procedure recommended by the lock vendor.
February 2016
Appendix
L000950, Version: 4.0
A