All rights reserved
Loading the Overlaminate
(Note: This procedure only applies to the HDP5000-LC.)
The loading process for both the Thermal Transfer Overlaminate and the PolyGuard™
Overlaminate material is the same. Refer to the following steps to load either type of
overlaminate into the Printer.
Step
Procedure
1
Remove the overlaminate from its packaging.
2
Load the Lamination Rolls into the Cartridges until they click.
3
Tighten the Lamination Rolls.
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8
50