Adjusting The Lamination Speed - Transfer Dwell Time - HID HDP5000 User Manual

All rights reserved

Adjusting the Lamination Speed - Transfer Dwell Time

Step Procedure
1 Adjust the Transfer Dwell Time to control the Lamination Dwell Time or
through-put speed of a card in seconds per inch and the Lamination
Temperature.
•
Default = 2.0 seconds per inch
•
Upper Limit = 5.5 seconds per inch
•
Lower Limit = 0.8 seconds per inch
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 134