HID HDP5000 User Manual page 185

All rights reserved
Troubleshooting with the Printer Error Message Table
Printer Error
Message
Laminator Film
Sensor Error
Remove Laminator
Film
Print Film Out
Print Film is not
Installed
Print Film Sensor
Error
HDP5000 High Definition Card Printer/Encoder User Guide
Cause
The Laminator cannot find
the next panel on the
Film.
To continue, remove the
laminator's film.
The Print Film installed in
the printer is empty.
No Print Film is installed in
the Printer.
The Printer cannot find
the next panel on the Print
Film.
HID Global Corporation
Solution
Check that the Film is installed
properly and press Resume.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
Open the Laminator's Front Cover.
Remove the film and close the
Laminator's Front Cover.
Install new Film and press the
Resume button to continue printing.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Install the Film and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Check that the Print Film is installed
properly and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
L000950 Rev 1.8 185