Appendix A: Hdpii Plus; Accessory Procedures - Using The Security Lock Slot - HID HDP5000 User Manual

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
11

Appendix A: HDPii plus

This section only pertains to the HDPii plus.
Dimensions
11.1

Accessory Procedures - Using the Security Lock Slot

Important: Compatible locks are not sold by HID Global; however, they are readily available
from computer stores.
The HDPii Printer has a Security Lock Slot located in the back lip of the metal chassis to
accommodate a standard laptop security lock.
To prevent unauthorized removal of the HDPii, attach an industry standard security cable to an
immovable object and then lock the cable to the Security Lock Slot.
Note: HID Global does not sell any type of locking device, but provides this feature for your
added security.
The lock slot has a plastic covering that needs to be penetrated by the lock.
Note: Simply push the lock end into the slot with adequate force to break the protective film.
Follow the locking procedure recommended by the lock vendor.
July 2013
HDPii plus: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD
HDPii plus + Dual-Sided Module:
11.50"H x 25.00"W x 9.25"D / 292mmH x 626mmW x 235mmD
© 2012, 2013 HID Global Corporation. All rights reserved.
Page 99 of 101