HID HDP5000 User Manual page 319

All rights reserved
Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using
the Workbench
Step Procedure
10 Follow the same instruction as above for the back side of the card.
11 a. Save this template using the Save tab.
b. Close the Workbench. (Note: Any Software program file printed with the
YMCFK ribbon installed into the printer will print this design with the F
panel of the ribbon. It will print the same file each time unless you recreate
a new template.)
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 319