Section 13: Fluorescent Panel Usage - HID HDP5000 User Manual

All rights reserved
Reviewing the Card tab and Diagnostic button
Display B – Fargo Workbench Printer Utility (see the appropriate User Guide located on your
CD)

Section 13: Fluorescent Panel Usage

YMCFK Ribbon for HDP5000 is an economical way to add a fully customizable,
incremental level of security to your photo identification cards. This process allows the user
to configure the data that is printed with the fluorescent panel of an YMCFK Ribbon. (Note:
Any software program may be used to print the special florescent panel of the Ribbon to a
card once the driver and Workbench are set up correctly.)
• These Ribbons contain a yellow (Y), magenta (M), cyan (C), and resin black (K) panels to
create a full color over-the-edge printing identification card. In addition, the Ribbon
contains a dye-based fluorescing panel (F) which will allow you to print a standard or one-
to-one personalized grayscale fluorescing image that is completely invisible until exposed
to ultraviolet light.
There are two (2) methods used to accomplish the creation of a custom fluorescent image
when using the YMCFK Ribbon for the HDP5000.
• The first method (described below) uses the Fargo Workbench Printer Utility to create a
static image that will be applied automatically to each card sent to the printer.
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 310