Section 15: Packing The Card Printer - HID HDP5000 User Manual

All rights reserved

Section 15: Packing the Card Printer

The purpose of this section is to provide the User with a specific packing procedure for the
HDP5000.
(Note: Do not install the Lamination Module to the Printer before shipping. The Lamination
Module must be packaged in its own box and shipped separately, then installed at the site.
Attaching both modules together before shipping may cause damage.)
Follow this instruction to pack the Card Printer for transport.
Step Procedure
1 Clean the inside of the Printer with deionized air. Wipe it down with a lint-free
cloth.
2 Clean the Printhead with a Printhead swab.
3 Pack the Printer in the original carton and packing materials.
4 Be sure to enclose any necessary paperwork, test cards, etc.
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 340