All rights reserved
Using the Character Size buttons
Use this option to customize the Character Data Size (Bits per Character) used to encode
the magnetic data on the currently selected track. (Note: This character size includes the
parity bit (if enabled).)
Step
Procedure
•
1
Select 4 Bits to change the bits per character to 4 BPC.
•
Select 5 Bits to change the bits per character to 5 BPC. (Note: This is
the default for Tracks 2 and 3).
OR
•
Select 7 Bits to change the bits per character to 7 BPC. (Note: This is
the default for Track 1).
OR
•
Select 8 Bits to change the bits per character to 8 BPC.
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8
122