HID HDP5000 User Manual page 160

All rights reserved
Troubleshooting with the LCD Error Message Table
LCD Error Message
Film: Wrong Material
(PC Error Message
No. 173)
Flipper Jam
(PC Error Message
Nos. 74 and 199)
Head Loading
(PC Error Message
No. 111)
HDP5000 High Definition Card Printer/Encoder User Guide
Cause
The HDP Film is not installed
properly or has been
damaged.
A card is jammed in the card
flipping area of the Printer.
An unrecoverable error has
occurred during printing.
HID Global Corporation
Solution
Verify the correct film is
installed in the film Cartridge.
Open the Printer's Flipping
Module Cover.
Clear any cards in the Flipping
Module by opening the
Printers Cover and using the
Forward and/or Back buttons
located on the Printer's Front
Cover.
Ensure that the Flipper Module
can rotate freely. Close the
Printer's Flipping Module
Cover.
Press the Resume button on
the Printer's Front Cover to
continue printing.
To cancel the print, press the
Cancel Print button from the
Driver's display dialog.
Reset the Printer and try
again. If this problem persists,
call for technical assistance.
L000950 Rev 1.8 160