All rights reserved
Technical Specifications
Term
Overlaminate
Options
(HDP5000-LC
and HDP5000
only)
Power Supply
Print Area
Printing Method
Print Ribbon
Options
HDP5000 High Definition Card Printer/Encoder User Guide
Description
All overlaminates are available in either clear, holographic globe
design or custom holographic design. They can also be optimized
for use with smart cards and Magnetic Stripes.
Here are the options:
•
Thermal Transfer Overlaminate, .25 mil thick, 500 prints
•
PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints
(PolyGuard available in a CR-80 patch size)
•
80W for HDP5000
•
160W (two 80W bricks) for the HDP5000-LC
(Note: This product is intended to be supplied by a Listed Power
Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)
Over-the-edge on CR-80 cards.
HDP™ Dye-Sublimation / Resin Thermal Transfer
HDP5000 and HDP5000-LC (prints or images):
•
Full color, YMC*, 750 prints
•
Full color with resin black, YMCK*, 500 prints
•
Full color with two resin black Panels, YMCKK*, 500 prints
•
Full color YMC with resin black and heat seal panel for difficult-
to-print surfaces, YMCKH*, 500 prints
•
Full color YMC with resin black and UV fluorescing panel,
YMCFK*, 500 prints
•
Full color YMC with resin black and Inhibitor panel, YMCKI*,
500 prints
•
Premium Black Resin (K) 3000 prints
*Indicates the Ribbon type and the number of Ribbon panels printed
where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, H=Heat
Seal and F=Fluorescing
HID Global Corporation
L000950 Rev 1.8
26