HID HDP5000 User Manual page 168

All rights reserved
Troubleshooting with the LCD Error Message Table
LCD Error Message
No iClass Encoder
(PC Error Message
No. 177)
No Mag Module
(PC Error Message
No. 31)
No MiFare Encoder
(PC Error Message
No. 203)
No Prox Encoder
(PC Error Message
No. 32)
No Ribbon
(PC Error Message
No. 25)
HDP5000 High Definition Card Printer/Encoder User Guide
Cause
You are trying to send
encoding data, but the
Printer is not configured with
this Encoder type.
MAG encoding job sent to
Printer without a MAG
Encoder.
You are trying to send
encoding data, but the
Printer is not configured with
this Encoder type.
You are trying to send
encoding data, but the
Printer is not configured with
this Encoder type.
You are trying to send
encoding data, but the
Printer is not configured with
this Encoder type.
No Ribbon is installed in the
Printer.
OR
The Ribbon RFID tag is bad.
HID Global Corporation
Solution
You are trying to send
encoding data, but the Printer
is not configured with this
Encoder type.
To cancel, click on Cancel
Print.
To cancel, click on Cancel
Print.
Install the correct Ribbon and
press the Resume button
located o the Printer's LCD
display.
To cancel the print, press the
Cancel Print button from the
Driver's display dialog and the
Cancel button located on the
Printer's LCD display.
L000950 Rev 1.8 168