All rights reserved
HID Global Corporation
Using the Resin Heat Adjust Option
Use this adjustment for Black resin text and barcodes appear faded or too light/dark.
Using the Sleep Time Option
This setting adjusts the time until printer stops energizing the transfer roller conserve energy.
A setting of "0" will disable. (Note: The counter for this setting starts after Standby Time has
elapsed.)
Using the Standby Time Option
This setting adjusts the time until printer goes into a reduced transfer roller temp to conserve
energy. (Note: A setting of "0" will disable. Settings are in minutes.)
Using the Blush Point Option
The blush point is compensation during printing:
• There is no dye transfer.
• There is no a light gray line on a portion of the card.
• It should be white.
Using the LCD Contrast Option
Use this setting to adjust the brightness of the LCD panel.
Using the Cleaning rate Option
The message to clean the printer uses a defaulted number of passes of 3000 and to change
this click up or down one number per one card.
HDP5000 High Definition Card Printer/Encoder User Guide
L000950 Rev 1.8
295