Network Management Interface; Telnet Command Line Interface; Initiating A Telnet Session - HID HDP5000 User Manual

All rights reserved

Network Management Interface

The SNMP interface is described below.
Interface Description
•
SNMP
The Ethernet interface is a fully-manageable SNMP agent that supports
MIB-II.
•
The Ethernet interface is MIB II compliant, allowing SNMP managers to
monitor protocol, network and routing statistics.

Telnet Command Line Interface

Initiating a Telnet Session

This procedure shows how to initiate a Telnet session from a PC in order to access the
Telnet services provided by the Printer.
Description
Initiating a Follow these instructions to issue Telnet commands.
Telnet
1. Identify the IP address of your Printer. (Note: See
session
Automatic IP Address
2. Initiate a Telnet session from a DOS window on your PC. At the DOS
prompt, enter telnet [IP Address]
•
•
•
3. Enter "help" or "?" to get an on-window list of supported Telnet
commands. .
HDP5000 High Definition Card Printer/Encoder User Guide
Mode.)
Example: C:\>telnet 192.168.11.12
All Telnet responses from the Printer will then be displayed in the
Telnet session on the PC.
All commands entered will be sent to the Telnet client in the
Printer.
HID Global Corporation
Switching to the
L000950 Rev 1.8 198