Adjusting For The Resin Dither - HID HDP5000 User Manual

All rights reserved

Adjusting for the Resin Dither

Select the appropriate dither method according to the type of image to be printed. (Note:
This option only affects those objects printed on the backside of a card with the resin black
Panel of a YMCK YMCKK and YMCKI Print Ribbon. This is only enabled when using at least
one K panel and dual sided enabled, splitting one set of panels.)
Step Procedure
1 Select Optimized for Graphics when printing lower quality images (e.g.,
clipart, logos, etc.) with resin.
OR
Select Optimized for Photo when printing photo quality images with resin.
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 101