Using The Transfer Temp Offset Option; Using The Ribbon Print Takeup Tension Option; Using The Film Print Takeup Tension Option - HID HDP5000 User Manual

All rights reserved

Using the Transfer Temp Offset Option

This option adds an offset to the temp the printer is reading from the transfer roller. (Note:
This setting should be used only make the temp of the transfer roller and the goal on LCD
match.)
• Use the slider on "Image Transfer" tab to make adjustment for card stock. (Note: A "-"
Adjustment will increase the actual temp of roller.)

Using the Ribbon Print Takeup Tension Option

This procedure controls the tension of the color Ribbon during printing.
• Adjust the Ribbon tension if the Ribbon wrinkle is appearing on the card. (Note:
Adjustments moderately change the image length.)

Using the Film Print Takeup Tension Option

Caution: The Film Drive sets the baseline for the Film Tension and should not be adjusted
by the reseller or the end User.
• Adjustments moderately change the image length.)
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 292