All rights reserved
Reviewing the Magnetic Self Test
Step
Procedure
1
This option only applies if a Magnetic Encoding Module is installed in the
Printer. (Note: The Printer will feed, encode and eject a card. Be sure to
have high coercivity cards installed when running this test.)
Reviewing the YMCK Self Test
Step
Procedure
1
Use this card to confirm that image colors are properly reproduced. Image
consists of sixteen graduated steps of RGB and YMCK. (Note: This print will
provide maximum image size, giving complete card Coverage on a CR-80
sized card.)
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8
191