HID HDP5000 User Manual page 364

All rights reserved
Section 18: Glossary of Terms
Term
Overlaminate
Parallel
Parallel Port
PC (Personal
Computer)
PCB (Printed Circuit
Board)
Peel
Peel-Off
Peripheral
Pinch Roller
HDP5000 High Definition Card Printer/Encoder User Guide
Definition
Protective clear or holographic material to increase security and
durability applied over the printed surface with a hot Roller.
A method of data transfer in which serial data is divided into
sections and sent simultaneously down parallel wires to speed
transfer rate.
A communication socket on a device that allows for parallel data
transfer.
A stand-alone, programmable, electronic device that can store,
retrieve and process data consisting of a CPU, mouse, keyboard
and monitor.
A solid, multi-layered plate on which electronic elements are
attached, either through the Board or on the surface.
The removal of a film or Ribbon from a card surface (at a
perpendicular angle) to ensure proper transfer, then separation,
from the card surface.
A bar on the Lamination section that holds the film at the correct
position and provides proper peel angle.
Any device that is attached externally to a PC. These often share
the same data cable or port as a Printer and can be the source of
communication problems.
A free spinning (non-driven) Roller that presses the card against
the drive Roller, on the opposite side, to ensure an adequate
normal force for proper traction.
HID Global Corporation
L000950 Rev 1.8 364