HID HDP5000 User Manual page 352

All rights reserved
Section 18: Glossary of Terms
Term
Coercivity
Color matching
Compressed air
Contrast
Control panel
CR-79
CR-80
CR-90
CR-100
HDP5000 High Definition Card Printer/Encoder User Guide
Definition
The property of a Magnetic Stripe that indicates the amount of
force needed before magnetic saturation, measured in Oersted
(Oe).
The process of adjusting color hue, saturation and brightness, to
duplicate a desired color. An algorithm within the Driver, which
adjusts the color balance and provides output with the desired
color, automates this process.
Air stored in a tank or produced by an aerosol can, delivered by
through nozzle at a high speed. Used in the Printer to blow out
debris.
The degree of difference in luminance of two areas.
The panel on the Printer from which the User can control Printer
functions. The Printer is usually composed of the control buttons
and an LED or LCD display.
A card dimension standard of 2.0625 L X 3.3125 W (+/-0.002 W,
+/-0.005 L) or 52.400 X 84.150 mm.
A card dimension standard of 2.125 X 3.370 (+/-0.002 W, +/-
0.005 L) or 53.975 X 85.598 mm.
A card dimension standard of 2.375 X 3.625 (+/-0.002 W, +/-
0.005 L) or 60.325 X 92.075 mm.
A card dimension standard of 2.625 X 3.875 (+/-0.002 W, +/-
0.005 L) or 66.675 X 98.425 mm.
HID Global Corporation
L000950 Rev 1.8 352