HID HDP5000 User Manual page 71

All rights reserved
Selecting the Card Type
Step Procedure
2 If using a card stock other than listed, use the Custom 1options to save
custom Dwell Time and dwell temperature controls on the Image Transfer
tab.
a. Click on the Custom options and enter a name for the card stock.
b. Click on the Image Transfer tab to adjust the Dwell Time and
temperature sliders to the appropriate settings. See the next page. (Note:
These settings will be saved for the custom card type when the Printer
Driver setup window is closed.)
c. Custom Card stock: To determine the proper settings for custom card
stock, apply the Tape adhesion Test.
Test
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
Conducting the Tape Adhesion
L000950 Rev 1.8 71