HID HDP5000 User Manual page 201

All rights reserved
Reviewing the Telnet Command Table
Telnet Command
set sysinfo contact
location
label
from
syslog name
type
dest
email
udp
from
HDP5000 High Definition Card Printer/Encoder User Guide
Command Purpose
Set the contact string.
Set the location string.
Set the label string.
Set all strings from
default or current
settings.
Change the name of a
system log path
Change the type of a
system log path. This
starts or stops logging
on start of jobs or on
faults.
Change the destination
of a system log path.
This may be set to
none, e-mail, udp or
tcp.
Change the e-mail
address for e-mail
notification for a
system log path. It
must specify a valid e-
mail address.
Specify the IP address
of the UPD system
logging program.
Restore system log
path settings from the
default or current
settings.
HID Global Corporation
Command Format
set sysinfo label [<STRING>]
set sysinfo location [<STRING>]
set sysinfo label [<STRING>]
set sysinfo from default|current
set syslog <LOG_NAME> name
<NEW_NAME>
set syslog <LOG_NAME> type
[[-]job] [[-]pfault]
set syslog <LOG_NAME> dest
none|email|udp|tcp
set syslog <LOG_NAME> email
<EMAIL>
set syslog <LOG_NAME> udp
<IPADDRESS>
set syslog from default|current
L000950 Rev 1.8 201