Using The Clean Printer Group Box; Selecting The Advanced Settings Tab - HID HDP5000 User Manual

All rights reserved

Using the Clean Printer Group Box

The default setting is checked. If checked, Printer Cleaning Notification dialog box is
displayed when Firmware EE setting changes after 3000 cards. (Note: Firmware EE setting
resets upon clean command being sent to the Firmware.)
• Clean Now radio button: This is the default every time this message box launches.
• Clean Now radio button: When this is chosen (and click OK), the Toolbox is launched
open to Clean Printer tab.
• Remind Me radio dial: This activates a drop down for the User to choose a number of
cards to print until the next reminder. If the User chooses Never, then the Clean Printer
notification is cleared from Configuration tab. (Note: This is because IF the Clean
Printer notification is checked, the User might believe that the reminder is working while
Never means the reminder will never be displayed.)
• OK button: Use this button to close the dialog box and execute the User choice.
• Cancel button: Use this button to close the dialog box with no changes to the state of
Printer setting. If the User exits the Toolbox without clicking Clean, then the Printer
Cleaning Reminder dialog box will reappear on the next print.

Selecting the Advanced Settings tab

Use the Advanced Settings tab for adjusting the internal Printer settings, which are
customized for every Printer at the factory and saved directly within the Printer's memory.
(Note: You can select the Restore Defaults to restore the internal default settings.)
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 282