HID HDP5000 User Manual page 109

All rights reserved
Adjusting the Image Position controls
The display (below) represents how the printed image will move in relation to the fixed card
position as positive and negative image placement values are entered.
Step Procedure
2 Follow these instructions:
•
Use the Vertical adjustment to move the image toward the front of the
Printer if a positive number is entered and toward the rear of the Printer
if a negative number is entered.
OR
•
Use the Horizontal adjustment to move the image toward the card
output side of the Printer if a positive number is entered and toward the
card input side of the Printer if a negative number is entered.
(Note: The maximum value for the Vertical and Horizontal adjustments is
±100 Pixels (10 Pixels = 0.03 (.8mm).)
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 109