HID HDP5000 User Manual page 182

All rights reserved
Troubleshooting with the Printer Error Message Table
Printer Error
Message
No Prox Card
Encoder
Headlift Error
Invalid Password
Laminator (General
Error)
Laminator (Check
Power)
HDP5000 High Definition Card Printer/Encoder User Guide
Cause
No Proximity Card
Encoder is installed in the
printer.
The Headlift Sensor is not
detecting movement from
the Headlift Cam.
The Password entered is
not a valid password.
The Laminator has
reported a general fault.
The Laminator's power is
OFF.
HID Global Corporation
Solution
To cancel, click on Cancel Print.
Reboot the Printer by cycling power.
To cancel, press the Cancel Print
button.
Press OK to enter another
password.
To cancel, press the Cancel Print
button.
Press the Resume button located
on the Printer to continue.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
Ensure that the laminator's power
cord is properly connected, cycle
power and press the Resume
button to continue.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
L000950 Rev 1.8 182