HID HDP5000 User Manual page 362

All rights reserved
Section 18: Glossary of Terms
Term
LoCo (Low
Coercivity)
LPT Port (Line
Printer Port)
Mag encoding
Mag stripe
Mag Track
Mag Verify
MB (Megabyte)
Memory
Menu
HDP5000 High Definition Card Printer/Encoder User Guide
Definition
The Coercivity value of magnetic media between 250 - 600 Oe
(ISO 7811-2). Fargo's Low Coercivity encodes at 300 Oe.
The system abbreviation for a PC's parallel Printer port.
The process of orienting successive magnetic bits to produce a
serial data string.
An area of the card with an applied or impregnated ferrous
material that can hold encoded data through a series of
prescribed polarity changes.
An area of a magnetic strip running the length of the card, with a
given width and position, constitutes a track. This is the area
dedicated to one data string, restricted to specific rules of format.
ISO standards specify three Magnetic Tracks on the back of a
card. The JIS standard specifies one track on the front.
A process to confirm proper magnetic encoding. After encoding,
the information is read off back and compared to the intended
string.
A unit of storage that equals 1,048,576 bytes.
A generic term for any device that stores digital information using
magnetic media or digital chip storage device.
A descriptive list of headings above nested functions that aid
navigation to a specific operation. These are found in computer
applications, with the heading at the top of a subset of like
functions. They are also on the Printer LCD control panel.
HID Global Corporation
L000950 Rev 1.8 362