Cleaning The Magnetic Encoder When Installed In The Flipper - HID HDP5000 User Manual

All rights reserved
Cleaning the Magnetic Encoder when installed in the
Flipper
Step Procedure
1 Open the top cover of the Flipper Module.
2 Remove the Alcohol saturated Cleaning Card from the wrap.
3 Tilt the Flipper Table so it is UP & Down. The Magnetic Head is located
underneath the flipper module.
4 Insert the cleaning card in to the flipper table slot.
5 Open the printer cover.
Use the Forward and Back buttons to move the card back and forth.
Turn the card around and perform the task again.
6 Let the Magnetic head dry thoroughly before plugging the printer back in.
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 307