HID HDP5000 User Manual page 183

All rights reserved
Troubleshooting with the Printer Error Message Table
Printer Error
Message
Laminator (Heater
Off)
Laminator (Heater
Timed Out)
No Laminator Film
Installed
HDP5000 High Definition Card Printer/Encoder User Guide
Cause
The Laminator's Heater is
OFF.
The Laminator cannot
reach the desired
operating temperature.
No laminator Film is
installed in the laminator
unit.
HID Global Corporation
Solution
Press the Resume button to
continue.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
a. Reboot the Printer by cycling
power. Check the Laminator
settings in the Printer Driver.
b. Click on the Default button
located on the Lamination Tab
of the driver to set the Laminator
settings to the factory default.
c. Resend the print job.
d. To cancel, press the Cancel
Print button or the Cancel
button located on the Printer.
Ensure that the appropriate
Laminator Film is installed.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
L000950 Rev 1.8 183