Defining The Area To Activate The Card Grid - HID HDP5000 User Manual

High definition card printer/encoder

Hide thumbs Also See for HDP5000:

Table of Contents

Defining the Area to activate the Card Grid

Select on the appropriate Defined Area (see below) to activate the card grid

in the upper half of the window.

It is through this card grid that up to five areas can be defined, as shown

When the card grid is first activated, then a small black square will

appear at its default size of .2 x .2 (5mm x 5mm) and at its default

location in the lower left-hand corner (0,0). (Note: This square

represents the first defined area.)

HDP5000 High Definition Card Printer/Encoder User Guide

HID Global Corporation

L000950 Rev 1.8